Skip to main content
How to Calculate ERP ROI Before You Buy: A Five-Year Framework for Singapore SMEs
Home / Blog / Digital Architecture & ERP
Digital Architecture & ERP

How to Calculate ERP ROI Before You Buy: A Five-Year Framework for Singapore SMEs

To calculate ERP ROI before you buy, add up five years of total cost, estimate the hard benefits you can measure, subtract, and then test the result against pessimistic assumptions. ROI is the net benefit divided by the total cost. Most Singapore SMEs decide on capability and vendor trust and never build this model, so the CFO question “what is the ROI?” gets a vague answer. This guide gives you the method, an illustrative worked example and a sensitivity test that shows how much of the estimated benefit you need to break even.

How do you calculate ERP ROI?

ROI = (five-year benefits minus five-year costs) divided by five-year costs. Use a five-year horizon because the major costs fall in year one while the benefits build over time, so a one-year view is nearly always marginal or negative. Focus on hard benefits you can measure, include soft benefits only with conservative assumptions, and keep strategic benefits out of the model or in a separate scenario.

What costs should you include?

Cost line What to include Commonly missed
Software Licence or subscription for five years from every vendor Price changes at renewal, extra users and modules
Implementation Configuration, data migration, training, project management Anything excluded from a fixed-fee quote
Internal staff time Workshops, testing, data cleansing, training, parallel running, in person-days at fully loaded cost This is the most under-counted line
Infrastructure Hosting, or servers and management if self-hosted Hardware refresh and backup
Support and upgrades Annual support and the cost of version upgrades Customisations that must be retested at each upgrade

Which benefits can you measure?

Benefit How to calculate it Caution
Labour saved on manual work Hours per week x loaded hourly cost x weeks x years x realisation factor Time saved does not always become headcount saved; apply a realisation factor and justify it
Lower inventory carrying cost Reduction in excess stock x annual carrying cost rate Use your own stock data and your own carrying cost rate
Cash released by faster collection (Days of improvement / 365) x annual revenue x cost of capital Base the improvement on your own receivables history
Fewer errors and less rework Current cost of wrong deliveries, disputes, write-offs and reprocessing Find the cost in your accounts: returns, adjustments, write-offs

What does a worked example look like?

The figures below are illustrative assumptions for a wholesale distributor with S$8 million revenue and 25 staff. They are not Mxgsoft client results. Replace every input with your own data.

Line Calculation Five-year value (S$)
Total cost Subscription, implementation, training, internal time 120,000
Admin labour saved 15 hours x S$25 x 48 weeks x 5 years x 65% realisation 58,500
Inventory carrying cost S$600,000 average stock x 20% reduction x 25% carrying rate = S$30,000 a year 150,000
Cash released 12 days / 365 x S$8 million = S$263,000, at about 5% = S$13,000 a year 65,000
Errors and rework S$20,000 a year, assumed 100,000
Total benefit 373,500
Net benefit and ROI 373,500 minus 120,000; divided by 120,000 253,500 and 211%

How much of the benefit do you need to break even?

In this example the project breaks even if only 32% of the estimated benefit appears. That is S$120,000 divided by S$373,500. The sensitivity table shows how the result changes under pessimistic assumptions.

Scenario Cost (S$) Benefit (S$) ROI
Base case 120,000 373,500 211%
Benefits at 50% of estimate 120,000 186,750 56%
Benefits at 50%, costs 30% higher 156,000 186,750 20%
Benefits at 25% of estimate 120,000 93,375 minus 22%

If your ROI stays positive when benefits halve and costs rise, you have a robust case. If it only works when every optimistic assumption is exactly right, change the scope, the budget or the assumptions before you sign.

What breaks a weak ROI model: benefits counted from day one although go-live is months away, internal staff time left out, benefit estimates copied from vendor brochures instead of your accounts, and no sensitivity test. Each makes the answer look better than it is.

Should grants be in the model?

Include a grant only after it is approved, and show it as a separate line so the base case does not depend on it. Enterprise Singapore states that the EDGE Grant replaced EDG, MRA and PSG from 30 September 2026, with support of up to 70% for SMEs that differs by activity. Read our EDGE guide and confirm the rules for your project.

What the model cannot own: whether your team will actually change how it works. The benefits above exist only if people use the system and the processes change. Budget for adoption, not just for software.

How do you build the model in a spreadsheet?

  1. Start with one assumptions sheet. Put every input in a labelled cell with its source (accounts, timesheets, vendor quote) and an owner who can defend it.
  2. Use five yearly columns and phase the benefits. Count no benefit before go-live and only a partial benefit in the first year of use. Show the ramp explicitly so nobody can say benefits started on day one.
  3. Separate hard and soft benefits. Show the ROI on hard benefits alone, then add soft benefits as a second line with conservative assumptions.
  4. Add two switches. One multiplier for benefits and one for costs let leadership test pessimistic cases without rebuilding the sheet.
  5. Calculate payback. Payback is the first year in which cumulative benefits exceed cumulative costs. Boards often ask for it alongside ROI.
  6. Name a benefit owner for each line. A saving without an owner rarely happens. Review actual results against the model at 6 and 12 months after go-live.

The model is also a project tool. When a configuration choice adds cost, you can see immediately what benefit it must deliver to justify itself.

Frequently asked questions

What is a good ROI for an ERP project?

There is no universal figure. A better test is whether the project stays positive when benefits are halved and costs rise, because that shows how much margin for error you have.

How long should the ROI horizon be?

Five years is a common horizon because costs are front-loaded and benefits build as the team adopts the system. A one-year view usually understates the return.

Which benefits are safest to include?

Hard, measurable ones that you can trace in your accounts: labour hours on defined tasks, excess stock, collection days, and the cost of errors and write-offs.

Should I include growth benefits?

Keep them out of the base case. Better visibility can support growth, but the effect is uncertain. Model it as a separate scenario if leadership wants to see it.

Who should build the model?

Finance should own it, with input from operations for volumes and hours. Ask vendors for cost projections, but build the benefit side from your own data.

A question for you: which one of your four benefit assumptions would you least want to defend to your board?

By Willie Loo, Managing Director, Mxgsoft Pte Ltd and Moxogo Pte Ltd, Singapore. Last reviewed 10 November 2026. Worked-example figures are illustrative assumptions.

Next step: pull your last twelve months of write-offs, returns and overdue invoices to ground the benefit estimates. For a view of the full cost side, read the true cost of ERP transformation.